Sewing Aides
|
 |
PAL 2 - Laser Crosshair Lamp
PAL 2 makes it so easy to hoop square. Just raise or lower the laser to align the out hoop's horizontal and vertical center markings with the illuminated crosshair. After sliding the fabric under the beam and inserting the inner hoop in to the outer hoop, you'll know your fabric is square in the hoop! 28" arm with flexible elbow joint allows adjustable height.
A20716 $90.00
Click on image for alternate view
|
 |
PAL - Perfect Alignment Laser
Believe it or not, with minimal marking you can quickly and easily align your embroidery designs for accurate placement every time.
A18607 $49.99
Click on image for alternate view
|
 |
MyPad for Needles
Machine needle organizer identifies your needles and store still good needles in the proper cell for future use.
A20412 $11.98
Click on image for alternate view
|
 |
Just Sew! Needle Minder
Holds your pins and needles magnetically.
A19329 $10.00
Click on image for alternate view
|
 |
Sip & Snip
Sturdy rust-proof metal frame. Holds coffee mug, cup, or bottle. Helps prevent messy beverage spills and sticky wet ring stains! Handy removable woven bag. Helps keep your work area free of scraps and clippings.
A18909 $23.95
Click on image for alternate view
|
 |
Steady Betty - Betty Bands
Gives you control of your fabric when free motion quilting. Light weight and comfortable. Unlike gloves you never need to remove them to thread needles, wind bobbins, etc.
A18713 $15.99
Click on image for alternate view
|
 |
Stitcher's Hardware Kit
Now you can get into those hard to reach places that standard screwdrivers are too tall and awkward to maneuver at your machine. Plus each tool fits snugly in the attractive zippered case for easy storage and travel.
A18623 $34.99
Click on image for alternate view
|
 |
Bird's Nest Tool
We've all experienced the tangle of threads known as a bird's nest. Standard scissors are too large and short to reach the tangle of threads. Now there is a tool to easily reach underneath the hoop to trim and free the hoop from the machine. The Kit includes a Stitch Releaser and a Thread Hook, along with a convenient, zippered storage case for safety.
A18619 $34.99
Click on image for alternate view
|
 |
Erica's Zinger Square
Always keep track of your scissors with this Erica's retractable zinger!
A16253 $3.99
Click on image for larger view
|
 |
Decorative Scissor Fob
Always keep track of your scissors with these gorgeous scissor fobs! Hand made in Canada, each fob is designed with colorful beads, matching tassel and a loop of chain that will attach to any sized scissor handle.
A15324 $12.00
Click on image for larger view
|
 |
ONE
4 1/2" Compact Screwdriver
Designed for changing batteries, sewing machine repairs, craft projects and other household jobs that require a small screwdriver. Set includes 3 Flat head & 3 Phillips head tips that are stored inside the sturdy aluminum barrel. Tips held in place by a magnet while in use.
Note: These screw drivers are shipped to us in random colors of black, yellow & blue. Erica's will choose the color to fill your order.
A14982 $6.99
Click on image at left for larger view
|
 |
Spool Stabilizer & Cap Set
Every now and then spools of thread will go a bit wobbly! The Spool Stabilizer and Cap Set is just the cure. The four winged spool stabilizers are perfect for stabilizing any large cone thread. Just slip over top of your spool pin. When you place the cone thread over the spool stabilizer, the four rubber wings grip the inside of the cone and NO MORE WOBBLE! The Set also includes 5 small and 5 large spool caps. These prevent smaller spools from wobbling and lead the thread off the top of the spool so you that you will never again break your thread due to thread backlash.
A14459 $5.99
Click on image for larger view
|
 |
Thread Caps
Set of 4. For those projects that require traditional spools of thread. Place under or over your spool of thread depending on your needs. The cap prevents thread from catching in the slits or rough spots found in the rim of the spools and keeps thread from wrapping around a vertical spool pin.
A14458 $5.20
Click on image for larger view
|
 |
Pedal-Stay
It's often difficult to have your sewing machine foot pedal stay in one place while it is in use. The ergonomic Pedal-Stay makes sewing easier and more comfortable, because you avoid the fatigue of chasing the sliding foot pedal around the floor. This is the most useful, low cost accessory to include in any sewing room design--or wherever you use your sewing machine--and nothing works better on either carpet or hard floors to hold the sewing machine foot pedal in place. Quality made in the U.S.A. of top grade (flexible) vinyl.
Foot pedal holder accessory fits all brands of sewing machines and sergers. Easy-to-attach strips for the underside of sewing pedal hold it firmly in position, but allow easy repositioning anywhere on non-skid pad if needed.
A10737 $15.99
Click on image for larger view
|
 |
DELUXE Sidewinder
The Portable Bobbin Winder
the portable bobbin winder with fantastic new features.
- Winds thread from small spools to cones that hold as much as 12,000 yards
- Two storage compartments in lid hold wound bobbins or spools of thread
- Telescoping guide adjusts to different heights of thread spools
- Thread cutter
- Tension knob to accommodate a variety of thread weights
- Bobbin fill control
- Speed control knob
- For household use only
- Universal adapter included
A10645 $99.99
click on image for larger view
|
 |
Serger Pad/Trim Catcher
Fits all serger sewing machines. Completely foam backed to protect furniture from scratches & absorbs vibrations for a quieter work environment. Large catcher bag collects scrap clutter and is easily removable.
A10616 $22.99
click on image for alternate view
|
Copyright © 1996-2013 Erica's Craft & Sewing Center
Content on this web site may not be reproduced in any form without written permission.
|
.png){kind=small}
